USB Gamma Spectroscopy Driver with NaI(Tl) <9.0% 20x10 mm Scintillation Detector

$700.00
Out of stock
Only 1 left
SKU
RH-UNIT-Spec-20-1

Unique sell - USB Gamma Spectroscopy Driver with new NaI(Tl) <9.0% 20x10 mm Scintillation Detector

Ready USB Gamma Detector Setup for amateur Gamma Spectroscopy on computer. Compatible with PRA and BecqMoni2011 freeware MCA. 

This is complete plug-and-play device that include Gamma Spectroscopy probe with 20x10mm NaI(Tl) crystal, adjusted electronic driver with USB output and BNC cable. The USB audio interface can be used with the popular freeware MCA software like PRA or Theremino for amateur gamma spectroscopy on computer.

The device is recommended for count-rate less than 1000 CPS and has typical FWHM resolution <9.00% at 662keV (depend on crystal sample). See attached example spectrum in the item's photos.

DETECTOR: the probe build with new manually machined aluminum enclosure. The assembly has high impedance divider on hamamatsu photomultiplier tube and high voltage BNC connector. The crystal is 20x10mm NaI(Tl) from good old stock. 

USB DRIVER: The box is complete and adjusted electronics that internally has high voltage converter, pulse amplifier and USB audio-data output. Everything is adjusted for optimal settings for the included probe. On one side it has BNC jack to connect the probe. On the opposite side it has mini USB jack to connect the box to a computer and has red power led for indication. When the box plugged into computer it will be detected as an general audio interface, that's why you can start to use PRA MCA software without any additional hardware.

COMPATIBLE SOFTWARE: PRA, Theremino or BecqMoni2011 freeware MCA. The detector with MCA software can collect gamma spectrum of Ba-133, Am-241, Cs-137, Co-60, Eu-152, Ra-226, Th-232, Lu-176 and more isotopes! You can get gamma spectrum in range of 26keV up to 3000keV, test food, minerals, radioactive items, check background.


Recommended software & driver settings:

Windows - Recording device settings - Levels - Recording 70%-100%

Windows - Playback device settings - Levels - set 0%

disable all sound effects in drivers.

Download and read manual PDF! Download BecqMoni2011

Set BecqMoni device config as shown on the following screenshots (click to view in details):

BecqMoni2011 recommended device config BecqMoni2011 recommended device config

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2012-2019 RH Electronics (aka RadioHobbyStore). All Rights Reserved.